Highest Quality P2S+F1 Ultra Ultimate Business Duo

Some of the materials xTool P2S can cut include:

Wood:

pine, oak, maple, birch, walnut, cherry, plywood and basswood.

Acrylic:

all colors and all types, including translucent, mirrored, opaque and clear acrylic.

Fabric:

cotton, polyester, nylon, silk, linen, polyester and polyamide fabric.

Leather:

genuine, synthetic, faux leather.

Others:

EVA foam, felt pad, plastic, rubber, paper, cork and cardboard.

But, xTool P2S cannot cut metal or glass, but it can engrave on it.Metal:

coated metal, anodized aluminum alloy, and anodized titanium steel. For stainless steel, you need to spray a coating on it before marking.

Glass:

float glass, insulated glass, frosted glass, tinted glass…etc.Please note that glass that is too hard or too thin may lead to break.

If it can be cut, it can generally be engraved.

You can cut solid wood of thickness up to 18 mm, such as black walnut and cherry wood. When cutting plywood, you are advised not to cut a piece thicker than 12 mm. The cutting of thick plywood may cause a fire.

You can use LightBurn to create your design and operate xTool P2S to cut materials. Currently, the camera and auto-focus functions are not supported by LightBurn. You need to perform framing to preview the processing area and manually input the material thickness.

When working with xTool P2S (baseplate in place), the rotary attachment supports cylinders with a diameter of 3 to 42mm; and when working with xTool P2S and its riser base, the rotary attachment supports cylinders with a diameter of 0 to 180mm.

Largest circle diameter: 305mm
Smallest circle diameter: 0.01mm

Consider the usage effects and environment when choosing the right machine.For environments like craft studio, living space, or basements that require mobility (such as moving upstairs or downstairs), a desktop CO2 laser machine is convenient.

For ground-level spaces like sheds, warehouses, or woodworking space, opt for a floor-standing CO2 laser cutter to avoid moving up and down.

Floor-standing machines typically have higher power, around 100W, but may lack advanced intelligence and can be challenging to use.

On the other hand, desktop CO2 laser cutters offer lower power, typically above 50W is sufficient for productivity, and often come with smart features

Yes, you can use the P2S without WiFi. Whether using XCS software or LightBurn, simply connect the machine to your computer via Type-C cable to operate without WiFi.

xTool F1 Ultra has ultra HD resolution, same as xTool F1. Its Fiber has 0.03*0.03mm compression spot on fiber, and its diode galvo laser has 0.08*0.1mm compression spot.

Yes, F1 Ultra can adjust from 30 to 60kHz.